PDA

View Full Version : No-slip locker

Micah
06-09-2005, 02:14 PM
Well I finally got it from Jabo. Now I just have to install it. I will be putting it in Monday I think. After David gets home from work. So if anybody wants to offer up their sevices I'll take em......hint, hint.....Landon, Fred or anybody else.
Fred
06-09-2005, 05:49 PM
I'll see what I can do. I am SHORT to leaving so I am working late and spending family time.
RodDawg
06-09-2005, 08:45 PM
Micah,

Don't forget that you'll need another spring from Powertrax before installing.
Fred
06-09-2005, 09:15 PM
Thats right you will!!!! Check out Power Trax home page you can probably purchase the springs from them!
Micah
06-09-2005, 10:03 PM
yeah I went ahead and ordered new springs for it. They will be here tomorrow. 16 bucks I was going to just replace the one but this is a whole new set.
Fred
06-09-2005, 10:12 PM
Better off replacing all the springs anyway. If u do one do them all!!! Did it come with instructions...rear is a little different from front.
Micah
06-09-2005, 11:16 PM
I downloaded them from Richmonds web site.
Fred
06-10-2005, 05:28 AM
Sweet you are set then!
Dave Taylor
06-10-2005, 07:49 AM
Some parts to be sure you have:

1) a 1/4 12-star SAE socket to remove the cross-pin.
The front one just punches out, but the rear is threaded and must be screwed out...a 1/4 socket that has 6 sides won't grab it; you gotta have 12 sides.

2) Make sure you have a very small socket with a very small head-size; or you won't be able to get the 12-star even in place.

3) Count all of your thrust and side washers when you pull out the spider/side gears...don't leave one in there; or headache-time later on.

4) When you are installing the locker; goop every part up real good with real thick grease; it will hold things together for you until you get it all assembled; and make things much easier.

Enjoy....no-slips are great!
mawardjr
06-10-2005, 07:53 AM
mmmm lockers ..... /ubbthreads/images/graemlins/dance.gif /ubbthreads/images/graemlins/tu.gif /ubbthreads/images/graemlins/dance.gif /ubbthreads/images/graemlins/tu.gif /ubbthreads/images/graemlins/dance.gif
Albert
06-10-2005, 08:06 AM
I have installed a lockright in my DANA30 front end of my LJ. It is the best thing I have did to my Jeep. Did very well out at TB. You done a good thing for your Jeep, the Jeep gods are happy.. /ubbthreads/images/graemlins/tu.gif
Micah
06-10-2005, 02:49 PM
Oh yeah I have a lockright in the front of mine. I would recomend it before a lift and if I ever get a new jeep it will be the first mod.