help w removing tailgate TorxBolts

[97TJAC]

i need to remove my tailgate hinges...
the T-40 that is holding the hinges together they are not budging at all!!

any tips or tricks

[EBlack42]

have you tried those loosening sprays ...i had a torxs bolt like that and I sprayed it with PB Blaster...

[Paul E]

I would recommend heat, but that would probably blister the paint. You MAY be able to take a fine blade and cut the paint that seals up the bolt a bit too.

BE SURE YOU HAVE A GOOD BIT!!! If you're not careful, you'll find it stripped out pretty quick.

[mawardjr]

righty tighty ... lefty loosy

:)

Maybe a longer handle on your wrench to add a bit more torque?

[Paul E]

righty tighty ... lefty loosy

:)

Maybe a longer handle on your wrench to add a bit more torque?

X10000000000!!!! and keep ONE hand applying DIRECT downward pressure on the bit/bolt itself as you turn.

[RecycledTeen]

Manual Hammer Impact Driver worked the best for me.

[97TJAC]

Thanks guys!
it looks like the paint may be the problem as it appears to have sealed around the bolt....
I hope i can get these darn things out!

[Don]

Thanks guys!
it looks like the paint may be the problem as it appears to have sealed around the bolt....
I hope i can get these darn things out!

They will come out... no doubt about it. Only question is HOW :eek: :)

[Paul E]

Read my post above. You need to score that paint with an exacto-type knife.