Indy
05-03-2010, 04:13 PM
I've been chopping up a wrecked 95 xj and would really just like it outta my way now. I'm going to scrap it soon, but anyone near Columbus, Ohio,...come and get it...or parts CHEAP. Like 5-10 dollars or less..
I sold the entire steering pump and box for 10 bucks...including the dropped pitman arm if that gives ya any idea...sold the radiator for 25, crank position sensor for 10,.....
not alot left but,... There is NO rust if you need floor pans, rockers, and the glass is like showroom new. (no rear hatch glass, it was hit there).
Shift cables, interior carpet and seats are nice.
Gas tank and sending unit and armor.,.......injectors, fuel rail, 2 clutch fans,.....
If the axle assemblies don't sell soon I'm going to cannibalize them for my YJ spare parts, I need a whee bearing righ now. $100 for front assembly. $75 for rear....including drive shafts with good u joints....
I have a good 4 speed tranny and 231 J t-case that came out of it that is for sale CHEAP also. Includes torque converter and fluid lines for $225. Gearing is 373.
I just don't need this stuff and got a good deal on the whole wreck....I just needed the motor for my YJ....threw a rod after breaking a wrist pin in #6 swamping it....(don't run in water fender high without your stock airfilter in the box :cool: )
IF somone wants the tranny and t case for 300 I'll GIVE you the rest of the xj,....but it's not rebuildable or I would have made a tough truck out of it from the beginning. Got hit in passenger rear corner, so it's skewwed.
I also have a useable top end from my old 4.0 out of my 91 wrangler if anyone needs or wants to put it to use...Water pump off same.
And, I have a perfectly good clutch for a 4.0.....I just put a new kit in while I had it all apart, but based on the new clutch disc measurements the old one has at least 70% left....I just did it because I don't want to do it again until I manage to crack this motor. Its a good cluthc and pressure plate, just caught in the crossfire of an engine swap....
I'd be willing to trade as well.
I'm ooking for a radiator for my 91 yj.
Also would like some mud terrains no larger than 33 inches. Used is ok, but not worn out
Or a body lift up to 3 inches...used is fine as long as it's serviceabe.
email me at alpro@rock.com for pics
I sold the entire steering pump and box for 10 bucks...including the dropped pitman arm if that gives ya any idea...sold the radiator for 25, crank position sensor for 10,.....
not alot left but,... There is NO rust if you need floor pans, rockers, and the glass is like showroom new. (no rear hatch glass, it was hit there).
Shift cables, interior carpet and seats are nice.
Gas tank and sending unit and armor.,.......injectors, fuel rail, 2 clutch fans,.....
If the axle assemblies don't sell soon I'm going to cannibalize them for my YJ spare parts, I need a whee bearing righ now. $100 for front assembly. $75 for rear....including drive shafts with good u joints....
I have a good 4 speed tranny and 231 J t-case that came out of it that is for sale CHEAP also. Includes torque converter and fluid lines for $225. Gearing is 373.
I just don't need this stuff and got a good deal on the whole wreck....I just needed the motor for my YJ....threw a rod after breaking a wrist pin in #6 swamping it....(don't run in water fender high without your stock airfilter in the box :cool: )
IF somone wants the tranny and t case for 300 I'll GIVE you the rest of the xj,....but it's not rebuildable or I would have made a tough truck out of it from the beginning. Got hit in passenger rear corner, so it's skewwed.
I also have a useable top end from my old 4.0 out of my 91 wrangler if anyone needs or wants to put it to use...Water pump off same.
And, I have a perfectly good clutch for a 4.0.....I just put a new kit in while I had it all apart, but based on the new clutch disc measurements the old one has at least 70% left....I just did it because I don't want to do it again until I manage to crack this motor. Its a good cluthc and pressure plate, just caught in the crossfire of an engine swap....
I'd be willing to trade as well.
I'm ooking for a radiator for my 91 yj.
Also would like some mud terrains no larger than 33 inches. Used is ok, but not worn out
Or a body lift up to 3 inches...used is fine as long as it's serviceabe.
email me at alpro@rock.com for pics